An Epoxy Zinc Primer for use in new construction and maintenance. It provides sacrificial protection for exposed steel including steel reinforcement and can be used in conjunction with CMCI Concrete Repair Mortars. all in one
ZINC RICH PRIMER - High Performance Anti
ZINC RICH PRIMER may also be applied by roller to larger areas of steel. Brush application is recommended for treatment of reinforcing steel. Apply Zinc Rich Primer in one full and unbroken coat using a suitable sized brush. Ensure that the exposed steel bars are fully coated, taking special care to cover the back side of the steel. Allow the primer to cure completely. If there is any doubt about achieving a continuous and unbroken coating, apply a second coat once the first coat is dry, usually between 15 minutes and one hour.
- Ease of application
- Compatible for use with all CMCI Repair products
- Excellent resistance to corrosion by electrical and chemical means
- Economic
It is recommended that Zinc Rich Primer application should begin when the steel surface is dry, generally within 3–4 hours after surface preparation. Pour the entire contents of the Hardener container into the Base container and mix thoroughly using a broad bladed scraper or a low-speed power mixer. For large areas, airless spray application is recommended using a tip range of 0.43–0.53 mm (17–21 mils) and a total output fluid pressure of not less than 176 Bar (2500 psi). An agitated paint container should be used during application.
ZINC RICH PRIMER
ZiNC RICH PRIMER is available in units of 1 liter and 1 gallon for coating reinforcing steel. Larger units are available on request.